Channel 4 (On 4001 Models) Or 8 (On 8001 Models); Connect Ouput; Power Up; Connect The Mixer Power Supply - Intelix 4001 VC User Manual

Intelix VC Series Mic/Line Mixer User Manual
3.3 Channel 4
This channel accepts two types of inputs. Two inputs may be connected to the channel at the
same time, but only one at a time may be mixed.
The position of the channel's XLR Input Pad Microphone/Line Switch determines which
input is mixed into the output; in the "mic" position, it uses the input connected to the XLR
Input Jack and in the "line" position, it uses the input connected to the RCA Jacks.
3.4 Connect Output
A connection should be made between the Master Output XLR Jack and an input jack of the
amplifier or other downstream equipment.
Press Output Pad Microphone/Line Switch to appropriate position: "in" for line-level output
(0 dBu) or "out" for mic-level (-50 dBu) output.

3.5 Power Up

3.5.1 Connect the mixer power supply

Connect the mixer's power supply to the AC power
jack on the rear of the unit, then connect the power
supply to a standard AC outlet.

3.5.2 Power up the mixer

1) Press the Power Switch to the "in" position (the
power indicator LED will light if mixer is powered).
2) Set the Master Output Volume Knob to "7".
3) Power up the external amplifier.
12
or 8
(on 4001 models)
Note: This channel accepts stereo inputs via the RCA
jacks. The channel's output to the mixer is the mono
sum of the "R" and "L" RCA jack inputs.
The XLR jack for this channel accepts only mic level
inputs.
)
(on 8001 models
intelix