Intelix VC Series Mic/Line Mixer User Manual
7.4.2.1 Ducking amount
The amount that the lower priority channels will be ducked can be varied from 0 dB to -
100dB. The factory setting is -10dB. All low priority channels are ducked by the same
amount.
The duck amount is controlled by the Duck Amount potentiometer (RP13).
Turning the pot clockwise direction will decrease the duck amount, while turning the pot
counterclockwise will increase the duck amount.
RP13 Duck
Amount Potenti-
ometer
7.4.2.2 Duck release time
Duck release time is the amount of time that the ducked channel(s) require to return to their
normal (unducked) levels after the high priority signal is no longer present. All channels share
a single duck release time. It can be varied from 0.5 seconds to 5 seconds. The factory setting
time is 2.5 seconds.
Duck Release time is controlled by potentiometer RP14. Turning the pot clockwise increases
duck release time, while turning the pot counterclockwise decreases it.
RP14 Duck
Release Time
Potentiometer
7.4.2.3 Group muting
The volume of a group of channels can be simultaneously muted with the mixer's automatic
ducking circuitry. Simply configure the trigger and ducked channels as explained in Section
7.4. Then set the Duck Amount Potentiometer above to -100dB (fully counterclockwise)
intelix
25