Setting Up The Group Call Ringer - Standard Horizon Eclipse DSC+ GX1100S Owner's Manual

11.7.4 Setting up the Group Call Ringer

The GX1100S has the capability to turn off the Group call ringer.
1. Press and hold down the [ CALL ( MENU )]
key until "SETUP MENU SETUP MENU" appears.
SETUP MENU SETUP MENU
SETUP MENU
2. Press the [
select "DCS SETUP DCS SETUP" menu.
DCS SETUP DCS SETUP
DCS SETUP
3. Press the [ ENT ] key, then select "DCS BEEP
with the [ ( UP )] / [ ( DOWN )] keys.
4. Press the [ ENT ] key.
5. Press the [
GROUP" then press the [ ENT ] key.
select "GROUP
GROUP GROUP
GROUP
6. Press the [
"OFF
OFF OFF
OFF OFF".
7. Press the [ ENT ] key to store the selected setting.
8. To exit this menu and return to radio operation
mode press the [ 16/9 ] key.
If you wish to return to enabling the ringer tone, just
repeat the above procedure, pressing the [ ( UP )] /
[ ( DOWN )] keys to select "ON
GX1100S
( UP )] / [ ( DOWN )] keys to
( UP )] / [ ( DOWN )] keys to
( UP )] / [ ( DOWN )] keys to select
ON" in step 6 above.
ON ON ON
DCS BEEP" DCS BEEP DCS BEEP
DCS BEEP
Page 47