Position Report; Setting Up Position Report Ringer - Standard Horizon Eclipse DSC+ GX1100S Owner's Manual

11.9 POSITION REPORT

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. In order to send your position you need to have a GPS receiver
connected or to have manually input your position. See section "11.11 MANUAL
INPUTTING OF THE GPS LOCATION."
11.9.1 Setting up a Position Report Ringer
The GX1100S has the capability to turn off the Position Report ringer.
1. Press and hold down the [ CALL ( MENU )]
key until "SETUP MENU SETUP MENU" appears.
SETUP MENU SETUP MENU
SETUP MENU
2. Press the [
select "DSC SETUP DSC SETUP" menu.
DSC SETUP DSC SETUP
DSC SETUP
3. Press the [ ENT ] key, then select "DSC BEEP
with the [ ( UP )] / [ ( DOWN )] keys.
4. Press the [ ENT ] key.
5. Press the [
select "POSITION REPORT
POSITION REPORT POSITION REPORT
POSITION REPORT POSITION REPORT".
6. Press the [ ENT ] key.
7. Press the [ ( UP )] / [ ( DOWN )] keys to select
"OFF
OFF OFF OFF".
OFF
8. Press the [ ENT ] key to store the selected setting.
9. To exit this menu and return to radio operation
mode press the [ 16/9 ] key.
If you wish to return to enabling the ringer tone, just
repeat the above procedure, pressing the [ ( UP )] /
[ ( DOWN )] keys to select "ON
Page 52
( UP )] / [ ( DOWN )] keys to
( UP )] / [ ( DOWN )] keys to
ON" in step "7" above.
ON ON
ON
DSC BEEP DSC BEEP" DSC BEEP
DSC BEEP
GX1100S