Controls And Indicators - Standard Horizon Eclipse DSC+ GX1100S Owner's Manual

9 CONTROLS AND INDICATORS

This section defines each control of the transceiver. See Figure 4 for
location of controls. For detailed operating instructions refer to section
"10 BASIC OPERATION."
POWER SWITCH / VOLUME CONTROL ( VOL/PWR )
Turns the transceiver on and off as well as adjusts the audio volume.
Turn this knob clockwise to turn the radio on and to increase the speakers
audio volume level.
Turn fully counter-clockwise to turn the radio off.
SQUELCH CONTROL ( SQL )
Adjusting this control clockwise, sets the point at which random noise on
the channel does not activate the audio circuits but a received signal will.
This point is called the squelch threshold. Further adjustment of the squelch
control will degrade reception of wanted transmissions.
[ CLR ( WX )] Key
Press the [ CLR ( WX )] key to cancel the menu selection.
Secondary use
Press and hold the [ CLR ( WX )] key to recall the last-used NOAA (National
Oceanic and Atmospheric Administration) Weather Channel from any chan-
nel location. Recalls the previously-selected working channel when press
and hold the [ CLR ( WX )] key again.
[ ENT ] Key
Press the [ ENT ] Key to determine the menu selection.
[ CALL ( MENU )] Key
Press the [ CALL ( MENU )] key to access the "DSC MENU
CALL", "GROUP CALL GROUP CALL", "ALL SHIPS CALL
CALL CALL CALL CALL GROUP CALL GROUP CALL GROUP CALL
"DSC LOG DSC LOG", and "DSC TEST
DSC LOG DSC LOG
DSC LOG
Before the "DSC MENU
tered. Refer to section "11.2 MARITIME MOBILE SERVICE IDEN-
TITY ( MMSI ) ."
Secondary use
Press and hold the [ CALL ( MENU )] key to access the "SETUP MENU
DIO SETUP" (refer to section "11 RADIO SETUP MODE"), "DSC SETUP
DIO SETUP DIO SETUP
DIO SETUP DIO SETUP
INPUT", and "MMSI SETUP MMSI SETUP" functions can be accessed from the "SETUP MENU
INPUT INPUT MMSI SETUP MMSI SETUP
INPUT INPUT MMSI SETUP
Page 16
ALL SHIPS CALL", "POS REQUEST
ALL SHIPS CALL ALL SHIPS CALL ALL SHIPS CALL
DSC TEST" functions can be accessed from the "DCS MENU
DSC TEST DSC TEST
DSC TEST
DSC MENU" menu can be selected a MMSI must be en-
DSC MENU DSC MENU
DSC MENU
NOTE
DSC MENU". The "INDIVIDUAL
DSC MENU DSC MENU
DSC MENU
POS REQUEST", "POS REPORT
POS REQUEST POS REQUEST POS REQUEST
NOTE
INDIVIDUAL INDIVIDUAL
INDIVIDUAL INDIVIDUAL
POS REPORT POS REPORT POS REPORT", POS REPORT
DCS MENU DCS MENU
DCS MENU DCS MENU".
SETUP MENU". The "RA-
SETUP MENU SETUP MENU SETUP MENU
DSC SETUP", "POS
DSC SETUP DSC SETUP
DSC SETUP
SETUP MENU SETUP MENU
SETUP MENU SETUP MENU".
GX1100S
RA- RA- RA- RA-
POS POS
POS POS