Scan Type; Key Beep (On/Off) - Standard Horizon Eclipse DSC+ GX1100S Owner's Manual

12.6 SCAN TYPE

This selection selects the scan mode between "Memory Scan" and "Priority
Scan."
1. Press and hold down the [ CALL ( MENU )] key until
"SETUP MENU SETUP MENU" appears.
SETUP MENU SETUP MENU SETUP MENU
2. Press the [ ENT ] key, then select "SCAN TYPE
RADIO SETUP" menu with the [
the "RADIO SETUP
RADIO SETUP RADIO SETUP
RADIO SETUP
[ ( DOWN )] keys.
3. Press the [ ENT ] key.
4. Press the [ ( UP )] / [ ( DOWN )] keys to select
"PRIORITY SCAN PRIORITY SCAN" or "MEMORY SCAN
PRIORITY SCAN PRIORITY SCAN
PRIORITY SCAN
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation
mode press the [ 16/9 ] key.
12.7 KEY BEEP ( ON/OFF )
This section allows the level of the key beep to be adjusted or turned off.
1. Press and hold down the [ CALL ( MENU )] key until
"SETUP MENU SETUP MENU" appears.
SETUP MENU SETUP MENU SETUP MENU
2. Press the [ ENT ] key, then select "KEY BEEP
RADIO SETUP" menu with the [
"RADIO SETUP
RADIO SETUP RADIO SETUP RADIO SETUP
[ ( DOWN )] keys.
3. Press the [ ENT ] key.
4. Press the [ ( UP )] / [ ( DOWN )] keys to select
desired beep level.
5. Press the [ ENT ] key to set the key beep condition.
6. To exit this menu and return to radio operation
mode press the [ 16/9 ] key.
Emergency alarm and beeps for DSC operation cannot be turned OFF.
Page 60
SCAN TYPE" in
SCAN TYPE SCAN TYPE
SCAN TYPE
MEMORY SCAN". MEMORY SCAN MEMORY SCAN
MEMORY SCAN
KEY BEEP" in the
KEY BEEP KEY BEEP
KEY BEEP
NOTE
( UP )] /
( UP )] /
GX1100S