Rear Panel - Datavideo TLM-433 Instruction Manual

Functions - Rear Panel
1.
2.
3.
4.
5.
Each monitor has a composite video input, with a loop-through
output (5). The video input can be PAL or NTSC, the TLM-433 will
automatically detect the video standard.
15 Pin Tally Light Input. The TLM-433 has bi-colour tally lights above
each monitor, these are controlled via the 15 Pin tally input socket.
The Datavideo TB-10 can be connected to supply tally information
from the SE-1000 switcher. (For other tally systems, see Tally Light
Socket Wiring for more details)
Connect the supplied switch mode power supply to this socket. The
locking collar screws into place once the plug has been inserted. It is
also possible to power the TLM-433 from other regulated 12V
supplies (min 2.0A).
The earth terminal can be used with other equipment that has the
same feature. Connect all items together to ensure that they are
grounded.
Each monitor has a composite video input (1), with a loop-through
output. The video input can be PAL or NTSC, the TLM-433 will
automatically detect the video standard.
7