Table of Contents
Advertisement
Brightness / Contrast / Saturation - Each monitor can be individually adjusted for brightness,
contrast and colour saturation. The settings are all done in a similar way.
Select the adjustment that you want to make and press the ENTER button. The adjustment bar will
appear on the screen, and can be adjusted using the UP / DOWN buttons. Once set as required press
the ENTER button.
Reset / Default - This can be used to return the monitor to the factory default settings.
Tally Light Socket Wiring
The Tally Light Socket controls the tally lights which are above each monitor.
The Tally Lights are bi-colour - RED indicates the source is LIVE (On-Air) AMBER indicates the source
is (CUED UP).
The socket works on simple contact closure between pins, the following table shows the pins for each
monitor.
Monitor A
Pins 1 - 4 = RED
Pins 3 - 4 = AMBER
Monitor B
Pins 6 - 9 = RED
Pins 8 - 9 = AMBER
9
Monitor C
Pins 11 - 14 = RED
Pins 13 -14 = AMBER
Advertisement
Table of Contents
