Advertisement
Quick Links
General: Datavideo TLM-404 is 4x4" TFT LCD
monitors, 2U height designed for a standard EIA
19" rack.
NTSC/PAL video format auto
recognition with video loop through, 75-ohm
self-terminated video output connector. The
"AUX" input provides options for external format
converters such as SDI and DV input converter.
The hinges let you pivot tilt the screen +/- 30
degrees. Contrast, brightness, color and tint
controls for optimum display quality. (Tint NTSC
only )
TLM-404 INSTRUCTION GUIDE
Specifications:
LCD Display
Aspect Ratio
Brightness (luminance)
Video Input
Video Output
Video System
Tally Indication
Power Consumption
Dimension
4" TFT LCD active matrix, resolution 480 x 234
4:3
250 NITs
1.0 Vp-p, 75 Ohm
Loop-through with 75 Ohm- self terminated
NTSC/PAL auto recognition
Three-color Tally LED indicators
DC12Volt. 35 W plus (15W Aux Adapter)
3.5" x 2.8" x 19" (H x D x W), 2U Rack space
Advertisement
Related Manuals for Datavideo TLM-404
Summary of Contents for Datavideo TLM-404
- Page 1 General: Datavideo TLM-404 is 4x4” TFT LCD monitors, 2U height designed for a standard EIA 19" rack. NTSC/PAL video format auto recognition with video loop through, 75-ohm self-terminated video output connector. The "AUX" input provides options for external format converters such as SDI and DV input converter.
- Page 2 TALLY INPUT: D Sub 15 pin connector on the rear panel works by closing contacts between a ground pin and the corresponding LED pin as shown on following pin out table. Do not give power to the pins. AUX INPUT: D Sub 9 pin connector on the rear panel. Provides an external video input with input select interface and power supply.