Diamondback 400Tm Owner's Manual page 15

program, simply press "STOP" key once.
o The data window will display "PAUSE" during pause mode
o The incline will stay where it is at; speed will return to 0mph.
o Press "STOP" key one more time during Pause mode, the
program will end and enter workout summary mode.
o If no key is pressed after 30 minutes in Pause mode, the console
will reset and return to idle mode.
• Resume a program : To resume a program back to the point of where
you left off, press "START" key during pause mode.
• Re-start a program: The user may re-start a program after the program
ends. Simply press "START" key during Cool Down or Workout
Summary mode. The program will be started immediately without Warm
up. The program default will remain the same as previous program; the
calories and distance will continue accumulating.
• Speed adjustment: When speed adjustment is allowed by a program,
you may adjust the speed from 0 mph to 10 mph by pressing SPEED
UP/DOWN key.
• Incline adjustment: When incline adjustment is allowed by a program,
you may adjust the incline from 0% to 10% by pressing INCLINE
UP/DOWN key.
• English / Metric setting: The default Units is English system. To enter the
system-switching mode, press & hold "SPEED UP" & "SPEED
DOWN" keys at the same time for 2 seconds during idle mode. The
Data display will show "1" for English units or "2" for Metric units.
To change it, press"UP/DOWN" key to switch the current Units. Press
"ENTER" key to accept the setting and enter idle mode.
• Beep Sound setting: you have the option to turn the beeper on or off. To
enter the beeper setting mode, press & hold "INCLINE UP" & "INCLINE
DOWN" keys at the same time for 2 seconds during idle mode. The
Data display will show "ON" or "OFF" to indicate current the beeper
setting. Press "UP/DOWN" key to switch the setting. Press "ENTER" key
to accept the setting and enter idle mode.
400 Tm Owner's Manual
Console (continued)
15