Steps To Reboot The System By Using Jumper Jbr1 - Supero X10SLQ User Manual

X10SLQ/X10SLQ-L User's Manual
D-2 Steps to Reboot the System by Using Jumper
JBR1
1. Power down the system.
2. Close pins 2-3 on Jumper JBR1, and power on the system.
3. Follow the BIOS recovery SOP listed in the previous chapter (Appendix C).
4. After completing the steps above, power down the system.
5. Close pins 1-2 on Jumper JBR1, and power on the system.
D-2