Setting Closed Reception - Muratec MFX-2570 Administrator's Manual

5
Press [Closed T
6
Select [ON] and press [Enter].
Press [OFF] to disable closed transmission.

Setting Closed Reception

If you set closed reception, since the sender that faxes can be received from is limited, you
can avoid receiving faxes from the wrong machine due to an entry error.
Note
• To set the passcode, refer to "
• For details on the communication range using closed communication and passcodes,
refer to "Communication and Range of
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
ransmission].
Setting the
Passcodes".
Passcode". (See page 2-14.)
(See page 2-15.)
Closed Communication
1
2
2-11