5
Enter the protect passcode using the numeric keys, and press [Enter].
Enter a four digit number.
Note
Make sure to make a note of and store the protect passcode you set so that you do not
forget it. It is also necessary to enter the protect passcode when disabling it.
Editing / Deleting the Protect Passcode
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Protect Passcode].
5
Enter the current protect passcode using the numeric keys, and press [Enter].
2-8
Setting Security Codes