About Truecharge™ 2 Battery Charger - Xantrex TC1012 Owner's Manual

Operation
About Truecharge™ 2 Battery Charger
Most Truecharge™ 2 Battery Charger models have three
outputs that share the full rated current enabling it to charge
three different batteries or battery banks that either have the
same chemistry or can tolerate the same charge sequence and
thresholds. Model TC1012 has only one output while model
TC1512 has two outputs that share the full rated current
output. The Truecharge™ 2 Battery Charger can perform
either three-stage charging (Bulk, Absorption, and Float) or
two-stage charging (Bulk and Absorption).
Important:
from each other. They share a common negative as shown in the
diagram below.
The negative bus to chassis connection as shown below may not
be suitable in some applications.
NOTE: Not to scale. For illustration purposes only.
AC source
L
N
G
L
N
G
NOTE: In some jurisdictions a
double-pole breaker may be
required.
Battery banks
Figure 2-1 Typical Three-Battery Installation
2–2
The battery banks are not galvanically isolated
BTS
(optional)
Negative
bus
975-0401-01-01
Remote panel
(optional)