Enabling/Disabling Automatic Brightness Adjustment "Auto Ecoview; Setting Indicator "Ecoview Index; Enabling/Disabling Auto Power-Off <Off Timer - Eizo FLEXSCAN T2351W Manual

4-3. Enabling/Disabling Automatic Brightness
Adjustment "Auto EcoView"
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press .
The "EcoView" menu appears.
2. Choose "Auto EcoView" with
3. Select "On" or "Off" with
4. Press
Note
• For this reason, as <Brightness> in the Adjustment menu is changed, the auto adjustment range is also changed.

4-4. Setting Indicator "EcoView Index"

By using the EcoView Index function, the indicator that shows the level of power saving appears at the time of
turning on the monitor, adjusting the brightness or switching the FineContrast mode. The power saving ratio
comes to high as the indicator level meter lights towards right.
Procedure
1. Press .
The "EcoView" menu appears.
2. Choose "EcoView Index" with
3. Select "On" or "Off" with
4. Press
4-5. Enabling/Disabling Auto Power-OFF <Off Timer>
This function allows you to specify whether to turn on/off the monitor automatically after a specified time has
elapsed in the power saving mode.
Adjustable range
Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 1-5 h)
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
2. Choose <Off Timer> from the <PowerManager> menu, and press
The <Off Timer> menu appears.
3. Select "Enable" or "Disable" with
If "Enable" is selected, set a monitor Off time with
4. Press
or . (Alternatively, you can use
or .
to exit the adjustment.
or
or .
to exit the adjustment.
or .
to exit the adjustment.
. (Alternatively, you can use to select it.)
or .
Chapter4PowerSavingFunctions
to select it.)
.
.
33