Media Manual Input Sensor Removal - Lexmark E260 Service Manual

4513-200, -220, -230

Media manual input sensor removal

1.
Remove the right side cover. See
2.
Place the machine on its top.
Note: Be careful to not mar the finish of the printer.
3.
Disconnect the sensor cable (A) from J23 (MPFS) on the controller board.
4.
Remove the screw (B).
5.
Free the cable from its retainers, and pull it through the opening toward the sensor mount.
4-42
Lexmark™ E260, E260d, E260dn
"Right side cover assembly removal" on page
A
B
4-53.