Door Mount Removal - Lexmark E260 Service Manual

Door mount removal

1.
Open the front cover.
2.
Remove the lower front cover. See
3.
Remove the left side cover. See
4.
Remove the right side cover. See
5.
Disconnect the operator panel cable (A).
6.
Remove the cable through the opening.
7.
Remove the three screws (B) from the right side of the printer.
"Lower front cover removal" on page
"Left side cover removal" on page 4-24
"Right side cover assembly removal" on page
4513-200, -220, -230
4-26.
4-53.
4-9
Repair information