Service Codes - Lexmark E260 Service Manual

4513-200, -220, -230

Service codes

All service errors are indicated by all lights flashing as the primary notification or code. The secondary light
pattern indicates an area or function which has the error. Tertiary codes (shown on the following pages) indicate
specific device errors. When all lights flash, double-click
see the tertiary code. Double-click
In the following example:
•
The primary light pattern indicates a service error (all flashing). Double-click
•
The secondary light pattern indicates a fuser, toner sensor, or fan error. Double-click
information.
•
The tertiary light pattern indicates the fan has stalled. Double-click
pattern will appear.
Note:
•
The printer cannot directly determine that a fan has failed, but can sense the higher temperature at the
fuser or printhead.
•
If data is sent to the printer and all lights flash simultaneously, and double-clicking
secondary code, then there may be a code problem. Contact the next level of support.
Primary Codes
Service primary code
When this code appears, double-click
Service primary code
Lights
Primary code for service errors
See service secondary error codes
2-28
Lexmark™ E260, E260d, E260dn
a third time to return to the primary light pattern.
Double-
click
Secondary Codes
✷
Light blinking
to reveal the secondary codes.
✷ ✷
to see the secondary code. Double-click
for more information.
again, and the original primary light
Double-
click
Tertiary Codes
✷ ✷
again to
for more
does not produce a
✷ ✷