Duplex Removal - Lexmark E260 Service Manual

Duplex removal

Note: The duplex will not need to be replaced on the 4513-200 printer.
1.
Remove the left side cover. See
2.
Remove the rear door and rear cover. See
3.
Place the printer on its top.
Note: Be careful to not mar the finish of the printer.
4.
Remove the LVPS/HVPS. See
5.
Remove the three screws (A) from the shield.
6.
Remove the four screws (B) from the duplex.
"Left side cover removal" on page
"Rear door and rear cover removal" on page
"LVPS/HVPS removal" on page
B
4513-200, -220, -230
4-24.
4-27.
A
Repair information
4-49.
4-11