Front Fan Assembly - HP Compaq Pro 6300 Series Microtower Maintenance And Service Manual

Front Fan Assembly

Description
Front fan
The front fan assembly is attached to the front of the chassis.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the baffle
5. Disconnect the fan cable from the red/brown system board connector labeled CHFAN.
Figure 7-28
6. Press the tabs that secure the fan assembly to the front of the chassis (1).
120 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Access Panel on page
(Front Bezel on page
(Fan duct on page
Disconnecting the front fan cable
(Preparation for Disassembly on page
95).
96).
119).
Spare part number
645327-001
94).