Front Fan Assembly
The front fan assembly is attached to the front of the chassis.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Remove the baffle
5.
Disconnect the fan cable from the red/brown system board connector labeled CHFAN1.
Figure 5-27
6.
Press the tabs that secure the fan assembly to the front of the chassis (1).
60
Chapter 5 Removal and Replacement Procedures
(Access Panel on page
(Front Bezel on page
(Fan duct on page
Disconnecting the front fan cable
(Preparation for Disassembly on page
39).
40).
59).
38).