Table of Contents
Advertisement
4.
Rotate the locking lever to its full open position (1).
5.
Raise and rotate the microprocessor retainer to its fully open position (2).
6.
Carefully lift the processor from the socket (3).
CAUTION:
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor's solder connections.
86
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Do NOT handle the pins in the processor socket. These pins are very fragile and
Hide quick links:
Advertisement
Table of Contents
