Computer Access Panel - HP Compaq Pro 6300 Series Microtower Maintenance And Service Manual

Computer Access Panel

Description
Access panel
To access internal components, you must remove the access panel:
1. Prepare the computer for disassembly
2. Loosen the two captive thumbscrews (1) that secure the access panel to the computer chassis.
3. Use the handle located between the thumbscrews to lift the access panel off the unit (2).
NOTE:
with the access panel is facing up.
Figure 6-1
You may want to lay the computer on its side to install internal parts. Be sure the side
Removing the Computer Access Panel
(Preparation for Disassembly on page
Spare part number
646825-001
54)
Computer Access Panel 55