Systems Insight Display Leds; Systems Insight Display Led Combinations - HP ProLiant DL G6 User Manual

Systems Insight Display LEDs

The HP Systems Insight Display LEDs represent the system board layout.
Item Description
Power cap
1
AMP Status
2
DIMM LEDs
3
All other LEDs
IMPORTANT:
Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing
each DIMM in a bank with a known working DIMM.

Systems Insight Display LED combinations

When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the health LED
indicate system status.
Status
To determine Power cap status, see
"Systems Insight Display LED combinations
(on page 9)."
Green = AMP mode enabled
Amber = Failover
Flashing amber = Invalid configuration
Off = AMP mode disabled
All LEDs flashing = DIMM unseated
Amber = Failure
Off = Normal
If more than one DIMM slot LED is illuminated, further troubleshooting is required.
Component identification 9