Regency 500 Series User Manual page 14

User's Guide
Installing the Telephone
Installation is completed
The following information will be displayed on the LCD (after
going on-hook) when the installation is complete.
Regency™ Series 500 Single Line Caller ID Telephone
8
User's Guide
Using the Features and Options
Data Port
The data port (jack) on the side of the base unit is used to plug in
any standard telephone device such as a:
• fax machine
• base station for a
cordless telephone
• computer modem
• answering machine
Note: There is a plastic safety plug inserted into the data jack
which must be removed using a small tool such as tweezers.
BE SURE TO UNPLUG BOTH THE TELEPHONE LINE CORD AND THE
POWER SUPPLY FROM THE REAR OF THE TELEPHONE PRIOR TO
REMOVING THIS SAFETY PLUG.
Hold Key
To use, press the HOLD key. The key will
illuminate indicating that the line is on
hold.
When placing a caller on hold, the
handset can be returned to its on-
hook position. The line will not be
disconnected. To return to the caller,
lift the handset, or press the SPEAKER
key.
Regency™ Series 500 Single Line Caller ID Telephone
29