Regency 500 Series User Manual page 20

User's Guide
Programming The Telephone
In Some Areas, The Area Code is Required for a Local Call
In some areas, the local service provider uses the same area
code for local calls. The following options are available for these
areas. Try each of the following scenarios and use the one with
the best result:
1 Program the area code, then place a local test call using the
call back feature.
2 Delete the area code and do not program the access code.
Place a local test call.
3 Program the area code into the access code location. Place
a local test call. (caution: this will always dial the area code)
4 Use the keypad to add any additional number(s) to the
displayed number on the screen. Place a local test call.
Note: Depending on your area and dialing pattern, you may
obtain the best result by using both the access code and area
code fields. If these sequences do not work, use the keypad entry
as an option for your Call Back.
Regency™ Series 500 Single Line Caller ID Telephone
14
User's Guide
Programming The Telephone
Changing information in memory
To change a name and number that is already programmed into
a speed dial location:
1 To select a memory location, press the
DIRECTORY / STORE key. The LCD will
display as follows. (MEM1: NAME): (Figure
1). Use the UP / DOWN key to find the
desired memory location (MEM1,
MEM2...MEM10).
2 Press the DIRECTORY / STORE key again and the LCD will display
OVERWRITE? (Figure 2). To proceed, press
the DIRECTORY / STORE key again and
the LCD will display MEM 1 ENTER NAME
(figure 3). If you do not want to make any
changes, simply lift the handset, then
hang up again.
3 Enter any alphanumeric characters for
the name using the keypad. If you
entered an incorrect character, press the
DELETE key to delete the character. When
complete, press the DIRECTORY / STORE
key again to store the name. The LCD will
then display NUMBER (figure 4).
4 Enter the number using the keypad. Press
the DIRECTORY STORE key to store the
number. If the number does not need to
be overwritten, press the DIRECTORY /
STORE key to bypass the number edit
mode and the original number in memory
be retained.
will
5 Press the DIRECTORY / STORE key twice to bypass the store AREA CODE
and ACCESS CODE. These two areas are not part of the speed dial
programming and any changes could affect the proper operation of
other features. See pages 13 to 15 for further information about AREA
CODE AND ACCESS CODE.
Regency™ Series 500 Single Line Caller ID Telephone
Figure 1
Figure 2
Figure 3
Figure 4
23