Regency 500 Series User Manual page 2

User's Guide
Safety Precautions, Care and Maintenance
When using your telephone equipment, follow basic safety
precautions to reduce the risk of fire, shock and injury to persons:
1. Read all instructions.
2. Follow all warnings and instructions marked on the product.
3. Before cleaning, unplug this product from the wall. Use a
damp cloth for cleaning. Do not use liquid cleaners or
aerosol cleaners.
4. Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The product may fall, causing damage to the product.
6. Do not block or cover the slots and openings in the cabinet
and on the back or bottom of the product. Do not place the
product on the bed, sofa, rug, or other similar surface.
7. Do not place this product near or over a radiator or heat
register.
8. Do not place this product in a built-in installation unless proper
ventilation is provided.
9. Use only the power supply provided with the set. Do not use a
power supply from another product.
10. The power supply is intended for use ONLY on a 110V-120V AC
60 Hz power outlet, which is the standard power offering in
Canada.
Regency™ Series 500 Single Line Caller ID Telephone
User's Guide
Trouble Shooting Tips for Regency 400 and 500
Can I go straight to a No, you have to scroll through the list to reach the
certain number/name number you want to dial. You can scroll quickly through
in my directory without by holding down the "Up" button or the "Down"
scrolling? button.
Display is blank. Check the power cord. Ensure that you are using the
power supply that was provided with the Regency
telephone.
Display is faint or hard With the receiver "on hook" adjust contrast using the
to read. volume control button.
How do I clear or delete You must overwrite a memory location once you have
only one memory stored something into that location. You cannot
location? individually erase a memory location.
How do I stop the While the receiver is "on hook" hold the * key down for
TouchLite® from flashing 3 seconds.
when there are no
messages in the mail
box?
Messages cannot be First, ensure that the TouchLite® is programmed
accessed by pressing correctly for easy access. See page 16. Also, please
TouchLite®. note the TouchLite® will not operate if the telephone
has been programmed to dial in Pulse. Ensure that the
telephone is programmed for Tone dialing
(see page 10).
Must I program the area If your local telephone company does not deliver the
code? area code with a local number's caller ID information,
it is not necessary to program this feature.
No sound on the Ensure that the curly cord is connected into the correct
receiver on a brand jack on the left side of the telephone as shown on
new phone. page 6.
Receiver won't stay Install wall mount clip provided in the package as
hung up when the set is shown on page 9. Also, IT IS IMPORTANT when you
wall mounted. place the receiver into the cradle, do so by placing
the top of the receiver into place first.
All phones should be used ONLY with the power
Why do I have to use the adapter supplied with that telephone. Using another
Regency power power adapter will cause internal damage to the set.
adapter?
Regency™ Series 500 Single Line Caller ID Telephone
41