Table of Contents
Advertisement
User's Guide
Programming The Telphone
Features and options are programmed by utilizing the DIRECTORY
STORE key.
Language option
Used to change the LCD
screen from English
(default) to French or
Spanish.
1
Press the DIRECTORY /
STORE key until the LCD display reads:
-1-ENG, -2-FRA, -3-ESP.
2
Enter the digit number of the selected language.
RESULT: The language selected displays immediately.
Tone / Pulse dialing option
Allows the user to select
tone (default) or pulse dial
mode from the LCD
display.
1
Press the DIRECTORY /
STORE key until the LCD
display reads: TONE = 1 PULSE = 2.
2
For tone dial mode, press the 1 key.
For pulse dial mode, press the 2 key.
RESULT: The LCD displays OK for the selected dial mode.
Regency™ Series 500 Single Line Caller ID Telephone
10
User's Guide
Using the Features and Options
Turning Message Waiting Light On/Off Manually
This allows the first user of voicemail the opportunity to notify
another user that a voicemail message is waiting for their review.
It also allows the user to stop the message waiting light from
flashing if it is doing so in error. When used, it will reset the light
signal in the phone. This does not send any outgoing signal to an
outside voicemail service.
When the message waiting light is turned off, it will re-activate
when a new phone message arrives in voicemail.
To turn ON:
While in on-hook state, and the light
is OFF, press the * key for three
seconds and the TouchLite® will
light.
To turn OFF:
While in on-hook state, and the light
is ON, press the * key for three
seconds and the TouchLite® will
turn off.
Note: When turning light off, the
Mail Icon on the LCD display will
also turn off.
Regency™ Series 500 Single Line Caller ID Telephone
27
Advertisement
Table of Contents
