Table of Contents
Advertisement
User's Guide
Installing the Telephone
Checking the Parts List
Ensure you have the following parts:
1. Wall mount wedge.
2. Power Adapter.
3. 7' Modular
telephone line cord.
4. 10' Modular coiled
handset cord.
5. 8" Modular wall
mount telephone
line cord.
4
6. Wall mount clip.
Connecting the handset cord
1
Plug one end of the handset cord into the modular jack on
the handset.
2
The remaining end
of the handset
cord plugs into the
jack located on
the left side of the
base unit.
Regency™ Series 500 Single Line Caller ID Telephone
6
2
1
3
5
Handset Cord
User's Guide
Handset Volume Control
With the handset off-hook, press
the arrows on the VOLUME key
repeatedly to increase or
decrease the volume. The
volume of the handset receiver
can be increased by 12 to 18
decibels.
The VOLUME key is an 8-step
volume control switch. Each volume level is indicated on the LCD
screen.
6
Note:
The handset volume control switch
will automatically reset back to its
normal level when hanging up.
This will ensure that the handset
volume resets back to normal for
the next phone call.
Flash Key
The FLASH key is an electronic
timed line break of 600 milli
seconds, like hanging up
momentarily, that is used for
accessing line features provided
by your telephone company or
by your telephone system. For
example, many times a flash is used for accessing features such
as Call Waiting. When used in a Centrex application, it can be
used to access other features like Call Pick-Up, Call Transfer, etc.
Contact your telephone system coordinator or your local
telephone company for further information regarding your line
Regency™ Series 500 Single Line Caller ID Telephone
Using the Features and Options
31
Advertisement
Table of Contents
