Completing Your Installation With A Bowl Light Fixture - Hunter TYPE 3 Installation And Operation Manual

8 • Completing Your Installation With a Bowl Light Fixture
Installing the Glass Bowl
8-1. Partially install two screws in the upper light kit.
8-2. Align the keyholes in the upper light kit ring with
the partially installed screws and rotate to situate
the screws in the narrow ends of the keyholes.
8-3. Install the remaining screw into the upper light kit
ring and securely tighten all three screws.
8-4. Install bulb.
8-5. Align the tabs in the globe assembly with the tabs
in the light kit ring, then lift the globe assembly
and rotate to engage the tabs. Make sure all tabs
are properly engaged before releasing the globe.
12
42659-01 • 02/19/08 • Hunter Fan Company
Steps 8-1 - 8-3
Steps 8-4 - 8-5
Screws
Bulb
Glass Bowl