Hunter Type 3 Owners And Installation Manual
Type 3 models
Hide thumbs
Also See for Type 3:
- Owners and installation manual (21 pages) ,
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (17 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45040-01
20081219
©2008 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 3
Summary of Contents for Hunter Type 3
- Page 1 Type 3 Models Type 3 Models Type 3 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 use a solid-state speed control with this fan. Use only Hunter speed 10 •... - Page 3 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
(Rotate the fan until you hear the notch pop into place.) Go to 5 • Wiring the Fan . WARNING: Fan may fall if not assembled as directed in these Allen Wrench installation instructions. 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 8: Installing The Canopy
5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 9: Assembling The Blades
6 • Assembling the Blades 6-1. Attach each blade to a blade iron using four blade assembly screws. Step 6-1 Blade Assembly Screws Blade Blade Iron 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 10: Bowl Light Fixture
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. Install included 100 Watt Halogen bulb. 7-2. Position the indentations in the outer rim of the glass shade so that they line up with the tabs on the inside surface of the light fixture rim. - Page 11 CAUTION: The remote control device complies with part 15 of the Tabs FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1.
-
Page 12: Assembling The Remote Control And Mounting The Cradle
Note: The receiver (built into the fan) has a memory function that retains the last dipswitch code setting. The setting will not change in the event of power failure or if the power to the fan is inadvertently shut off. 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 13: Operating And Cleaning Your Ceiling
Clean painted and high-gloss blades in the same manner as the fan finish. To Change Airflow Direction Press the reversing switch on the remote while the fan is running. In cold weather, use upward air flow pattern 45040-01 • 12/19/08 • Hunter Fan Company... -
Page 14: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 45040-01 • 12/19/08 • Hunter Fan Company...
Need help?
Do you have a question about the Type 3 and is the answer not in the manual?
Questions and answers