Hunter TYPE 3 Installation And Operation Manual
Type 3 models
Hide thumbs
Also See for TYPE 3:
- Owners and installation manual (21 pages) ,
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (17 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
TYPE 3 Models
42659-01 • 02/19/08
Advertisement
Table of Contents
Related Manuals for Hunter TYPE 3
Summary of Contents for Hunter TYPE 3
- Page 1 For Your Records and Warranty Assistance Ceiling Fans Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE 3 Models For reference also attach your receipt or a copy of your receipt to the manual. 42659-01 • 02/19/08...
-
Page 2: Table Of Contents
Fan ......14 use a solid-state speed control with this fan. Use only Hunter speed 11 • Troubleshooting ....16 controls. © 2008 Hunter Fan Company 42659-01 • 02/19/08 • Hunter Fan Company... - Page 3 Installer’s Choice and Optional Accessories Understanding Mounting and Installer’ s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods. Standard Outlet Box Mounting Considering Optional Accessories Style Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product.
-
Page 4: Getting Ready
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magnetic tip recommended) -
Page 5: Installing The Ceiling Plate
Note: The isolators should be flush against the ceiling. 2-7. Pass the screws through the slotted holes in the ceiling plate into the pilot holes you drilled. Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-4 – 2-7 Screw 42659-01 • 02/19/08 • Hunter Fan Company... -
Page 6: System
3-6. Tighten the loop and secure the screw and washer all the way down to the support brace. 3-7. Coil up the excess cable. 3-8. Return to the fan so you can complete the fan wiring. Step 3-1 Steps 3-6 – 3-7 Steps 3-2 – 3-3 Steps 3-4 – 3-5 3mm (1/8") Support Brace Outlet Box Braided Ceiling Cable 42659-01 • 02/19/08 • Hunter Fan Company... -
Page 7: Assembling The Blades
4 • Assembling the Blades 4-1. Insert blade through housing before installing grommets in each blade. 4-2. Attach each blade to the fan using two blade assembly screws. Grommet Blade Assembly Screw 42659-01 • 02/19/08 • Hunter Fan Company... -
Page 8: 5 • Setting The Remote Transmitter And Receiver
IMPORTANT! Before you change a jumper, make sure the battery is not connected to the transmitter. CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. -
Page 9: Wiring The Fan
H • Fan Black/White wire (ungrounded) from the receiver. • Receiver Black/White: “LIGHT LIVE OUT” I • Fan Red • Connect the grey wire (ungrounded) from the fan to the grey • Receiver Red Steps 6-5 – 6-7 wire (ungrounded) from the receiver. • Connect the black/white wire (ungrounded) from the fan to the black/white wire (ungrounded) from the receiver (marked on white tag “LIGHT LIVE OUT”). • Connect the red wire (ungrounded) from the fan to the red Small Wire wire (ungrounded) from the receiver. connector 42659-01 • 02/19/08 • Hunter Fan Company... - Page 10 6-9. Turn the splices upward and push them carefully back through the ceiling plate into the outlet box. 6-10. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42659-01 • 02/19/08 • Hunter Fan Company...
-
Page 11: Installing The Canopy And Canopy
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42659-01 • 02/19/08 • Hunter Fan Company... -
Page 12: Completing Your Installation With A Bowl Light Fixture
8-5. Align the tabs in the globe assembly with the tabs Steps 8-1 - 8-3 in the light kit ring, then lift the globe assembly and rotate to engage the tabs. Make sure all tabs are properly engaged before releasing the globe. Bulb Glass Bowl Steps 8-4 - 8-5 42659-01 • 02/19/08 • Hunter Fan Company... -
Page 13: Operating The Remote Control And Mounting The Holder
9-4. The reversing switch reverses the direction of the fan. 9-5. Press the OFF button to turn the fan off. Fan Light 9-6. When necessary, replace the battery with a 12-volt type 23A, MN-21 battery or equivalent. 9-7. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Steps 9-1 – 9-5 Step 9-6 Step 9-7 42659-01 • 02/19/08 • Hunter Fan Company... - Page 14 10-5. Clean wood finish blades with a furniture polishing cloth. Occasionally, apply a light coat of furniture polish for added protection and beauty. Clean painted and high-gloss blades in the same manner as the fan finish. In cold weather, use upward air flow pattern 42659-01 • 02/19/08 • Hunter Fan Company...
- Page 15 Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can cut back on expensive air conditioning...and save up to 40%* on cooling. In winter, your Hunter fan recirculates warm air and saves up to 10%* on heating bills. * On average at low speed settings. Your savings may vary based on climate, building type and thermostat setting. Save Energy and Money While Protecting the Environment Congratulations! You’re saving energy and money while protecting the environment by purchasing this ENERGY STAR qualified Hunter ceiling fan! With this purchase, you are doing your part to protect the environment. In 2010, ENERGY STAR qualified ceiling...
-
Page 16: Troubleshooting
2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 866-268-1936 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42659-01 • 02/19/08 • Hunter Fan Company...