Hunter Type 3 Owners And Installation Manual
Hide thumbs
Also See for Type 3:
- Owners and installation manual (21 pages) ,
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (17 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42200-01
20110412
©2011 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 3
Summary of Contents for Hunter Type 3
- Page 1 Type 3 Models Type 3 Models Type 3 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
• To reduce the risk of fire, electrical shock, or motor damage, do not 10 • Operating the Remote Control and use a solid-state speed control with this fan. Use only Hunter speed Mounting the Holder....16 controls, which are solid state. - Page 3 If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
- Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42200-01 • 04/12/11 • Hunter Fan Company...
- Page 5 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42200-01 • 04/12/11 • Hunter Fan Company... -
Page 8: Assembling The Top Housing
Make certain the housing sits flat on the Top Housing adapter. Hanger Adapter 3-2. Install three (3) 8-32 screws and tighten them securely. 42200-01 • 04/12/11 • Hunter Fan Company... -
Page 9: Assembling And Hanging The Fan
Adapter 4-7. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate. Low Profile 4-8. Place the slots over the hooks to hang the fan. Washer 42200-01 • 04/12/11 • Hunter Fan Company... -
Page 10: Setting The Remote Transmitter And Receiver
1 = on 1 = on 2 = on 2 = off Changes or modifications not expressly approved by Hunter Fan Company could void 1 = on 1 = on your authority to operate this equipment. Operation is subject to the following two conditions: 1. -
Page 11: Wiring The Fan
• Connect the black wire with a white stripe from the fan to the black wire with a white stripe from the receiver. • Connect the white wire from the fan to the white wire (LIGHT OUT) from the receiver. 42200-01 • 04/12/11 • Hunter Fan Company... - Page 12 6-9. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. Place the green and white wires on a separate side of the outlet box from the other wires. 42200-01 • 04/12/11 • Hunter Fan Company...
-
Page 13: Installing The Canopy
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42200-01 • 04/12/11 • Hunter Fan Company... -
Page 14: Assembling The Blades
8-3. Attach the blade to the motor using the blade assembly screws. 8-4. Repeat for each blade. Note: The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 15: Completing Your Installation
Install and Step 9-4 securely tighten all three globe assembly screws. Step 9-7 Trim Ring Globe Glass Assembly Globe Screw Light Assembly Screw Step 9-6 42200-01 • 04/12/11 • Hunter Fan Company... -
Page 16: Operating The Remote Control And Mounting The Holder
10-7. This product includes one 12-volt type 23A, MN-21 battery for use with the remote control transmitter. Please contact your local battery recycling center for proper battery disposal information. Steps 10-1 – 10-5 Step 10-6 Step 10-7 42200-01 • 04/12/11 • Hunter Fan Company... - Page 17 11-4. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades.
-
Page 18: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42200-01 • 04/12/11 • Hunter Fan Company...