Page 1
Type 2A Models Type 2A Models Type 2A Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
• To reduce the risk of fire, electrical shock, or motor damage, do not 7 • Completing Your Installation With or use a solid-state speed control with this fan. Use only Hunter speed Without a Bowl Light Fixture ..12 controls, which are solid state.
Page 3
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
Page 4
ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42897-01 • 11/16/10 • Hunter Fan Company...
Page 5
To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Low Profile Mounting fits close to the ceiling, recommended for ceilings less...
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Steps 2-3 – 2-5 Flat Washer 3” Wood Screw 42897-01 • 11/16/10 • Hunter Fan Company...
3-3. Install two locking screws through the holes in the side of the Square Hanger metal bracket to secure the square hanger. Motor Green Assembly Ground Wire Step 3-2 Green Ground Wire Step 3-3 #8-32 x 1” Screw Locking Screw 42897-01 • 11/16/10 • Hunter Fan Company...
• The black wire with a white stripe from the fan to the black wire with a white stripe from the ceiling. 4-4. Push all wires and wire connectors back through the ceiling plate hole Wire into the outlet box. Connector 42897-01 • 11/16/10 • Hunter Fan Company...
Motor 5-3. Install four canopy screws into the fan housing to attach the housing to the hanger bracket. Housing Notch Bump Step 5-2 Canopy Screw Canopy Screw Step 5-3 42897-01 • 11/16/10 • Hunter Fan Company...
6 • Assembling the Blades Step 6-1 (Detail) Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
Page 13
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Lower Switch Housing Plug Connector Detail Housing Assembly Screw 42897-01 • 11/16/10 • Hunter Fan Company...
Page 14
(You may find the Light Bulbs breakaway connector on the end of the (B10 extra chain.) Candelabra Base 60 Watt Maximum) Metal Rod Metal Disk Breakaway Glass Bowl Connector Cover Plate Finial 42897-01 • 11/16/10 • Hunter Fan Company...
Page 15
7-19. Install the switch housing cap and plug button to the lower switch housing. 7-21. Once you have uninstalled the light fixture, continue with step 7-1 Steps 7-15 – 7-18 Male Dummy Terminal Female Dummy Terminal Plug Button Step 7-19 42897-01 • 11/16/10 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42897-01 • 11/16/10 • Hunter Fan Company...