Hunter Type 5 Owner's Manual And Installation Manual
Hide thumbs
Also See for Type 5:
- Owner's manual and installation manual (19 pages) ,
- Owner's manual (16 pages) ,
- Installation and operation manual (12 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42858-01
20090910
©2009 Hunter Fan Co.
Type 5 Models
Type 5 Models
Type 5 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 5
Summary of Contents for Hunter Type 5
- Page 1 Type 5 Models Type 5 Models Type 5 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
Fan....... . 15 use a solid-state speed control with this fan. Use only Hunter speed 11 •... - Page 3 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard, or Angle mounting. The steps in this manual include Ceiling instructions for only one Installer’s Choice mounting method.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Do not over tighten. Flat Washer 3” Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 42858-01 • 09/10/09 • Hunter Fan Company... -
Page 6: Assembling Pipe / Ball Assembly
3 • Assembling Pipe / Ball Assembly Your Hunter fan comes with an optional downrod extension pipe. If Figure 3a 2 1/2” Pipe you would like to use the enclosed optional downrod, complete the steps below. 4 1/2” Pipe / Ball... -
Page 7: Assembling And Hanging The Fan
U-shaped unscrewing. Once assembled, do not remove the downrod. Hole 4-4. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim. 42858-01 • 09/10/09 • Hunter Fan Company... -
Page 8: Wiring The Fan
5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42858-01 • 09/10/09 • Hunter Fan Company... -
Page 9: Installing The Canopy
6-5. Install the third canopy screw into the canopy. Once all three screws are in, tighten them. Note: If the tabs are already engaged, do not rotate. Step 6-3 Step 6-4 Ceiling Plate Canopy Hanger Screw Ball Canopy Screw 42858-01 • 09/10/09 • Hunter Fan Company... -
Page 10: Assembling The Blades
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Install the grommets into the blades by hand. Step 7-1 (Detail) 7-2. Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron. -
Page 11: Completing Your Installation With A Bowl Light Fixture
8 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. The switch housing assembly is made up of three sections: the switch housing gasket, the upper switch housing, and the lower switch housing/light assembly. - Page 12 NOTE: Both plug connectors are polarized and will only fit together one way. Make sure that both connectors are properly aligned before connecting them together. Incorrect connection could cause improper operation and damage to the product. 42858-01 • 09/10/09 • Hunter Fan Company...
- Page 13 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 42858-01 • 09/10/09 • Hunter Fan Company...
-
Page 14: Replacing The Light Bulb
Finial the tabs in the bottom part of the globe assembly. 9-5. Securely tighten the finial. Steps 9-1, 9-3 Globe Assembly Candelabra Bulb Step 9-2 Step 9-4 42858-01 • 09/10/09 • Hunter Fan Company... -
Page 15: Operating And Cleaning Your Ceiling
To change the direction of air flow, turn the fan off Reversing and let it come to a complete stop. Pull the reversing Switch switch chain on the fan to the next position. Restart fan. Pull Chain Light Chain 42858-01 • 09/10/09 • Hunter Fan Company... -
Page 16: Troubleshooting
Wait 30 seconds, then resume power to the fan. 888-830-1326 (In Canada, call 1-866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 42858-01 • 09/10/09 • Hunter Fan Company...