Hunter Type 3 Owners And Installation Manual
Type 3 models
Hide thumbs
Also See for Type 3:
- Owners and installation manual (21 pages) ,
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (17 pages)
Table of Contents
Advertisement
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45031-01
20090910
©2009 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 3
Summary of Contents for Hunter Type 3
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45031-01 20090910 ©2009 Hunter Fan Co. Type 3 Models Type 3 Models Type 3 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
10 • Troubleshooting . . . . . . . . . . . . . . . . . . 13 © 2009 Hunter Fan Company 45031-01 • 09/10/09 • Hunter Fan Company Welcome ®... - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 45031-01 • 09/10/09 • Hunter Fan Company For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing toward the ceiling peak. -
Page 6: Assembling And Hanging The Fan
3-7. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate. 3-8. Place the slots over the hooks to hang the fan. 45031-01 • 09/10/09 • Hunter Fan Company Steps 3-2 – 3-3 Canopy... -
Page 7: Setting The Remote Transmitter And Receiver
CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. -
Page 8: Wiring The Fan
5-7. Position the receiver in the canopy so that the antenna is close to the edge of the ceiling plate for clear reception. 45031-01 • 09/10/09 • Hunter Fan Company... -
Page 9: Installing The Canopy And Canopy
Note: Should you need to remove the trim ring, press firmly on opposite sides of the trim ring directly above the groove in the hanger ball. The tabs will flex out releasing the canopy trim ring. 45031-01 • 09/10/09 • Hunter Fan Company Step 6-1 Groove... -
Page 10: Installing The Blades And Bulb
190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 45031-01 • 09/10/09 • Hunter Fan Company Blade Washers Step 7-1 Blade Assembly... -
Page 11: Mounting The Holder
You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. 45031-01 • 09/10/09 • Hunter Fan Company Switch Down Dimmer Steps 8-1 –... -
Page 12: Fan
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. 45031-01 • 09/10/09 • Hunter Fan Company Reversing Switch In warm weather, use... -
Page 13: Troubleshooting
1. Turn the power to the fan off at the wall switch. Wait 30 seconds, then resume power to the fan. 45031-01 • 09/10/09 • Hunter Fan Company 10 • Troubleshooting If you need parts or service assistance, please call...
Need help?
Do you have a question about the Type 3 and is the answer not in the manual?
Questions and answers