Hunter Type 3 Owners And Installation Manual
Type 3 models
Hide thumbs
Also See for Type 3:
- Owners and installation manual (21 pages) ,
- Owner's manual and installation manual (18 pages) ,
- Installation and operation manual (17 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
42488-01
20111221
©2011 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 3
Summary of Contents for Hunter Type 3
- Page 1 Type 3 Models Type 3 Models Type 3 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
• To reduce the risk of fire, electrical shock, or motor damage, do not Mounting the Holder... . 17 use a solid-state speed control with this fan. Use only Hunter speed controls, which are solid state. - Page 3 If you want to use an existing fan site, complete the following checklist System to determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
- Page 4 Section 2 • Installing the electrical codes and ANSI/NFPA 70. If Ceiling Plate. you are unfamiliar with wiring, use a qualified electrician. 42488-01 • 12/21/11 • Hunter Fan Company...
- Page 5 Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for both Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Assembling The Blades
Step 2-2 clean the blades. Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor on the blades. Red Dot Step 2-3 42488-01 • 12/21/11 • Hunter Fan Company... -
Page 8: Installing The Light Kit
Twist the lower switch housing assembly counterclockwise to lock the screws in place. 3-8. Install the remaining housing assembly screw into the lower switch housing and tighten all three screws securely. Housing Assembly Screw 42488-01 • 12/21/11 • Hunter Fan Company... - Page 9 3-10. Connect the plug connectors between the black wire and the black wire with a white stripe. 3-11. Connect the plug connectors between the two white wires. Steps 3-10 – 3-11 42488-01 • 12/21/11 • Hunter Fan Company...
-
Page 10: Assembling And Hanging The Fan
CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from Downrod unscrewing. Once assembled, do not remove the downrod. Canopy Canopy Trim Ring Setscrew 42488-01 • 12/21/11 • Hunter Fan Company... -
Page 11: Installing The Ceiling Plate
Steps 5-3 – 5-6 5-8. Place the slots over the hooks to hang the fan. 3” Wood Screw Flat Washer 42488-01 • 12/21/11 • Hunter Fan Company... - Page 12 7.8. Return to the fan so you can complete the fan wiring. Step 7-1 Steps 7-6 – 7-7 Steps 7-2 – 6-3 Steps 7-4 – 7-5 3mm (1/8") Support Brace Outlet Box Braided Ceiling Cable 42488-01 • 12/21/11 • Hunter Fan Company...
-
Page 13: Receiver
8-7. Position the receiver in the canopy so that the antenna is close to the edge of the ceiling plate for clear reception. 42488-01 • 12/21/11 • Hunter Fan Company... -
Page 14: Installing The Canopy And Canopy Trim Ring
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42488-01 • 12/21/11 • Hunter Fan Company... -
Page 15: Installing The Glass
10-2. Carefully lift the glass shade up inside the light fixture as far as it will go. 10-3. Rotate the shade in a clockwise direction until it is held tightly in place by the three tabs. 42488-01 • 12/21/11 • Hunter Fan Company... -
Page 16: Fan
12-2. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 17: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42488-01 • 12/21/11 • Hunter Fan Company...