Grandstream Networks Handy Tone 386 User Manual page 20

HandyTone-386 User Manual
keep-alive interval:
Use NAT IP
Proxy-Require:
TFTP Upgrade Server:
SUBSCRIBE for MWI:
Offhook Auto-Dial:
Send Flash Event:
FXS Impedance:
Caller ID Scheme:
Onhook Voltage (FXS
Port):
Disable Call-Waiting:
Polarity Reversal:
NTP Server:
Send Anonymous:
Lock keypad update:
PSTN access code:
Syslog Server:
Syslog Level:
Admin Password
SIP Server
Outbound Proxy
Yes, STUN server is:
20
(in seconds, default 20 seconds)
header)
192 168 1 30
. . .
No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
No Yes (Flash will be sent as a DTMF event if set to Yes)
current setting is " 600 Ohm (North America)"
current setting is " Bellcore"
current setting is " 48V"
No Yes
No Yes (reverse polarity upon call establishment and termination)
time.nist.gov
No Yes (caller ID will be blocked if set to Yes)
No Yes (configuration update via keypad is disabled if set to Yes)
current setting is "NONE"
Cancel Update
All Rights Reserved Grandstream Networks, Inc. 2004
This contains the password to access the Advanced Web Configuration page.
This field is case sensitive.
SIP Server's URI or IP address
SIP Outbound Proxy Server's URI or IP address
stun.mycompany.com
(if specified, this IP address is used in SIP/SDP message)
(if specified, the content will appear in Proxy-Require
(for remote software upgrade and configuration)
(User ID/extension to dial automatically when offhook)
(URI or IP address)
(key pattern to use the PSTN line, default is "*00")
Reboot
20
Grandstream Networks, Inc.
(URI or IP:port)