Advanced User Configuration - Grandstream Networks Handy Tone 386 User Manual

HandyTone-386 User Manual
MAC Address
WAN IP Address
Product Model
Software Version
System Up Time
Registered
PPPoE Link Up
Detected NAT Type
6.2.3

Advanced User Configuration

To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to
get to the following login page. The password is case sensitive and the factory default password for
Advanced User is "admin".
Advanced User configuration includes not only the end user configuration, but also advanced
configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configuration. Following is a snap shot of the advanced configuration page.
The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
This field shows WAN port IP address.
This field contains the product model info.
Program: This is the main software release, its number is always used for
firmware upgrade.
Bootloader: This is normally not changed.
HTML: This is the web user interface, normally not changed.
VOC: This is the codec program, normally not changed.
This field indicates how long the device has been up since the last reboot.
This field indicates whether the device is registered to the SIP server.
This field shows whether the PPPoE connection is enabled or not.
This field shows what kind NAT the HandyTone is connected to via its
WAN port. It is based on STUN protocol.
Grandstream Device Configuration
Password
All Rights Reserved Grandstream Networks, Inc. 2004
Grandstream Device Configuration
Login
17
Grandstream Networks, Inc.