Clarion ClarionMIND NR1UB Owner's Manual page 34

3-1-3
Saving an Access Point
You can use the procedure below to assign a
name to the currently connected access point
and save it. The next time you want to use the
access point to connect to a network, simply
select it on the profile list.
1
On the Connection screen, tap the [Profile]
key.
This displays the Profile screen.
The following describes the functions of the keys
on the screen.
Tap a check box to select it.
Edits the access point's profile name,
ESSID, etc.
Deletes the access point.
Connect Connects to the currently selected
access point.
New Registers a new access point.
Save Saves the currently selected access
point.
Export Exports the profile of an access point.
Import Imports the profile of an access point.
2
On the toolbar at the bottom of the screen,
tap the [Save] key.
Chapter 3 Connecting to a Network
3
Tap the "Profile name" field.
This displays a software keyboard.
4
Enter the profile name and then tap
5
Tap the [OK] key.
3-1-4
Displaying Network Information
Use the following procedure to display the
information about the configured network
settings.
1
On the Connection screen, tap the
[Connection Information] key.
The following network information is displayed.
• Wi-Fi MAC address
• Bluetooth device address and authorization
PIN code
• TCP/IP
• IP address
• Subnet mask
• Default gateway
• DHCP server
• DNS servers (primary, secondary)
NOTE
Only the Wi-Fi MAC address and Bluetooth
device address are displayed when not
connected to a network.
NR1UB/NR1UW/NR1UR
.
33