Clarion ClarionMIND NR1UB Owner's Manual page 107

Chapter 7 Control Panel
Default Returns settings to their factory
defaults.
Edit Configures advanced power
mode settings.
7-1-1
Configuring Advanced Power Mode
Settings
1
On the Power Management screen, tap the
[Edit] key.
This displays the screen shown below.
The following describes the functions of the keys
and bar on the screen.
Power mode Specifies the power source.
Standard: Select when
connected to the charge jack or
optional Car Dock (NK1U).
Battery: Select when using a
battery pack.
Turn off display Tap + (increase) or - (decrease)
when idle to change the time until display
power is turned off when idle.
You can set a time in the range
of 1 to 60 minutes.
To disable Turn off display when
idle, select [None].
Standby when Tap + (increase) or - (decrease)
idle to change the time until standby
is entered when idle. You can
set a time in the range of 1 to 60
minutes.
To disable Standby when idle,
select [None].
CPU Specifies the CPU capacity.
max: Specifies 100% capacity.
middle: Specifies 75% capacity.
min: Specifies 50% capacity.
106
NR1UB/NR1UW/NR1UR
Power Source Displays the power source.
External: charge jack or optional
Car Dock (NK1U)
Battery: Battery pack
Saves the settings and exits the
setting screen.
Default Returns settings to their factory
defaults.