Table of Contents
Advertisement
Problem
I can't establish a
Bluetooth connection.
Application Manager
Problem
• Install or uninstall
failed.
• An error message
appears about an RPM
database error.
The "Now Updating.
Please don't turn the
power off." message stays
on the screen and
download does not end.
Cause
The Bluetooth device cannot be found.
You are attempting to connect using an
unsupported profile.
Pairing cannot be performed.
I can't connect with a DUN (DialUp
Networking Profile).
The Airplane mode is on.
The DUN connection was broken.
Cause
A problem occurred in the RPM
database.
The file being installed in very large or the
speed of your connection is slow, which is
causing download to take a long time.
Chapter 9 Troubleshooting
Required Action
Check to make sure that the
Bluetooth device is turned on.
The only profile supported by this unit
is DUN. Check the profile.
The unit PIN code is "1234". Check
the PIN code.
On the Bluetooth Device screen,
check to make sure that the [DUN]
key is ON.
Turn off Airplane mode.
On the Dial-Up Network screen,
check to make sure that the
destination is configured.
Required Action
Execute [Control Panel] → [Advanced
Settings] → [Maintenance] →
[Recover RPM database] to restore
the RPM database.
Downloading a very large software
file can take long time to complete.
This is especially true for navigation
software files, which are about 200
MB. Depending on the speed of the
network you are using, download can
take several minutes.
NR1UB/NR1UW/NR1UR
125
Advertisement
Table of Contents
