1-4 Applying The Protection Film - Clarion ClarionMIND NR1UB Owner's Manual

1-4 Applying the Protection Film

1
Use a lens cleaning cloth or other soft cloth to wipe the LCD screen clean of dirt and dust.
2
Peel off the transparent separator.
3
Holding the film along the side edges, carefully apply it starting from one end of the screen making
sure that no air gets between the screen surface and the adhesive surface of the film.
If air does get between the film and the screen, lightly press the film where air bubbles are located
in order to move the air bubbles to the edges of the film so they can be released, or peel the film
from the screen and reapply it.
• The adhesive side of the protection film is prone to soiling by dirt and dust. Do not directly
touch it.
• Do not crease the protection film.
CAUTION
Chapter 1 Preface
NR1UB/NR1UW/NR1UR
15