Subscribe to Our Youtube Channel
Related Manuals for Clarke Contractor CCS2
Summary of Contents for Clarke Contractor CCS2
- Page 1 185MM CIRCULAR SAW 185MM CIRCULAR SAW MODEL No. CCS2 Part No. 6462015 Part No. 6462040 OPERATING & MAINTENANCE INSTRUCTIONS © 0704...
-
Page 2: Specifications
This product Confirms to 98/37/EEC Regulations PARTS: Parts@clarkeinternational.com Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. SERVICE: Service@clarkeinternational.com... -
Page 3: Parts Diagram
8. ALWAYS keep children away. All visitors should be kept a safe distance from the work area, especially whilst operating the machine. 9. ALWAYS use CLARKE replacement blades. The use of improper parts/accessories could be hazardous. 10. ALWAYS maintain machine in top condition. Keep tools/machines clean for the best and safest performance. -
Page 4: Maintenance
15. ALWAYS wear proper apparel. Loose clothing or jewellery may Kickback get caught in moving parts. Wear protective hair covering to contain long hair. Kickback is when the saw is driven back fiercely into the hands of the operator, and may be caused by the following: 16. -
Page 5: General Notes
4. Replacement fuse covers can be obtained from supported..NEVER on the part of the work that will become the off-cut. your local Clarke dealer or most electrical stockists. The notch on the front of the Guide Plate is marked 45 and 0 . -
Page 6: Operation
Operation Features WARNING! This appliance should not be used by anyone not fully trained in Fig. 1 the use and operation of Power Tools IMPORTANT! Before use, ensure the workpiece is perfectly secure, and there is sufficient clearance BENEATH the workpiece so that there is no possibility of the saw blade coming into contact with any other object.
Need help?
Do you have a question about the Contractor CCS2 and is the answer not in the manual?
Questions and answers