Axis 1620 User Manual page 43

AXIS 1620 User's Manual
Notes:
PSERVER_NDS
parameter
If the PSERVER_NDS parameter includes the name of a tree and
not a specific file server, RCONSOLE (RCONAGG in NetWare
5x) must be running on at least one file server in the specified tree.
If the IPX and IP transport protocols are enabled in your network,
you can use AXIS NetPilot to install the AXIS 1620 and to
connect print queues. Please refer to Basic Setup with AXIS
NetPilot, on page 22 and Advanced Installation using AXIS
NetPilot, on page 39.
Pure IP requires that you run NetWare 5 or higher.
As shown in the instructions in Installing the AXIS 1620, on page 42,
the PSERVER_NDS parameter specifies which NDS tree or file server
the AXIS 1620 will login to. It also specifies the path to the print
server object in the tree. The syntax of the PSERVER_NDS parameter
is displayed in the following examples:
Example 1:
TREE:NW5_TREE DevDept.acme
In this example a print server named DevDept, with context acme,
will login to the tree, NW5_TREE.
Example 2:
171.16.2.249 DevDept.acme
In this example a print server named DevDept, with context acme,
will login to a file server with the IP address 171.16.2.249. If you have
a DDNS server on your network you can replace the IP address with
the host name.
Section 4: Setting Up - NetWare
43