Axis 1620 User Manual page 109

AXIS 1620 User's Manual
Starting AXIS
ThinWizard
Follow the instructions below to start the AXIS ThinWizard:
1. Make sure that the server where you installed AXIS ThinWizard is
up and running on your network.
2. Start a Web browser from a client in your network.
3. Enter the IP address or the host name of the server where you
installed AXIS ThinWizard. If the server is installed on another
port than 80, you must enter the port name after the host name or
the IP address.
4. The AXIS ThinWizard start page appears in the Web browser.
Enter your user name and the password and click the Log in
button.
5. The AXIS ThinWizard interface appears. Select a network group
from the list. If the list is empty, you must first create a group.
Section 9: Management & Configuration
109