Axis 1620 User Manual page 106

Section 9: Management & Configuration
106
Viewing AXIS 1620
using NetSpot
As NetSpot communicates with the AXIS 1620 via the TCP/IP
protocol (and SNMP), it is necessary to configure the TCP/IP settings
of the AXIS 1620 as described in Assigning an IP address on page 26.
Alternatively, you can configure these settings using NetSpot as
follows:
1. Start NetSpot.
2. From the Device menu, select New...
3. Type the MAC address (Ethernet address) of the AXIS 1620 and
the IP address you want to assign to the AXIS 1620, and select the
Continue... button.
4. Select the frame type of your TCP/IP network, and select Add to
List button.
AXIS 1620 User's Manual