Axis 1620 User Manual page 41

AXIS 1620 User's Manual
Notes:
5. Select an existing print queue to connect to the server port, or
create a new print queue by clicking on Create Queue... If you
have selected an existing queue, advance to step 8. Continue with
step 6 only if you want to create a new queue.
6. Type the queue name in the Create Queue dialog window. If you
want to create a queue in the NDS tree you must also enter the
name of the volume where the queue will be located. Click OK.
7. Select the newly created queue from the queue list.
8. Select Print Server Mode or Remote Printer Mode. If you
selected Print Server Mode, advance directly to step 11, otherwise
continue with step 9. Please refer to Printing Methods, on page 44,
for further information about the two printing methods.
9. Select an appropriate NetWare Print Server name, that will be
associated with the AXIS 1620 print server, by using the Browse...
button.
You cannot type or edit the name manually.
Make sure that you have PSERVER.NLM running if you selected
Remote Printer Mode in step 8.
10. If you want to define a remote printer number slot manually,
check the Manual box and type the desired number in the box.
11. Click the OK button to return to the Network Environments
window.
Section 4: Setting Up - NetWare
41