Table of Contents
Advertisement
AXIS 1620 User's Manual
Viewing
the Status file
Performing Resets
Telnet Help
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 1620 by typing:
telnet <host name>
windows (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
and
.)
pass
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server's parameters to its
factory default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 1620 by typing:
telnet <host name>
windows (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
and
.)
pass
3. Restart the print server's protocols by typing:
softreset
Replace the command in step 3 above with
perform the other two reset operations.
By typing
in step 3 in any of the Telnet instruction sets above, a
help
list of all available commands will be displayed.
Section 9: Management & Configuration
or
telnet <IP address>
or
telnet <IP address>
hardreset
125
in a DOS
root
in a DOS
root
or
to
default
Advertisement
Table of Contents
