Appendix A Test Button - Axis 1620 User Manual

AXIS 1620 User's Manual

Appendix A Test Button

The Test Page
The Parameter List
The test button is located on the front right hand side of the AXIS
1620 and is used for:
• Printing a test page, checking the connection to the printer.
• Printing a parameter list, showing the AXIS 1620 current settings.
• Resetting the AXIS 1620 parameters to the factory default
settings.
Press the test button once to print a test page. If the test page prints,
the parallel interface is functioning correctly. The printed Test Page
contains basic information about the AXIS 1620. It is recommended
that you print a test page every time you have connected the AXIS
1620 to a printer.
Press the test button twice to print a parameter list showing the
current AXIS 1620 settings. This list provides comprehensive details
of all the parameters and their current status. Refer to
B - The Parameter List, on page 145.
If you want to change any of the parameters, use one of the methods
that are described in
Section 9 Management & Configuration, on page 99.
Appendix A: Test Button
143